ZyXEL Communications IES-22A - User Account; Chapter 9 User Account; User Account Screen; Figure 35 Basic Setting > User Account

IES-708-22A User’s Guide
89
CHAPTER 9
User Account
The User Account screens allows you to set up and configure system administrator accounts
for the IES-708-22A. You can also configure the authentication policy for IES-708-22A
administrators. This is different than port authentication in Chapter 24 on page 175.
See Chapter 24 on page 175 for background information on authentication.
9.1 User Account Screen
To open this screen, click Basic Setting > User Account.
Figure 35 Basic Setting > User Account
The following table describes the labels in this screen.
Table 13 Basic Setting > User Account
LABEL DESCRIPTION
Authentication Click this to open the Authentication screen. See Section 9.2 on page 90.
Enable Select this check box to turn on the administrator account.
Name Enter a user name for the administrator account.
Password Enter a password for the administrator account.
Retype Password to
confirm
Re-enter the administrator account’s password to verify that you have entered it
correctly.