IES-708-22A User’s Guide
45
CHAPTER 2
Hardware Installation and
Connection
This chapter shows you how to install and connect the IES-708-22A.
2.1 Freestanding Installation
1 Make sure the IES-708-22A is clean and dry.
2 Set the IES-708-22A on a smooth, level surface strong enough to support the weight of
the IES-708-22A and the connected cables. Make sure there is a power outlet nearby.
3 Make sure there is enough clearance around the IES-708-22A to allow air circulation
and the attachment of cables and the power cord.
4 Remove the adhesive backing from the rubber feet.
5 Attach the rubber feet to each corner on the bottom of the IES-708-22A. These rubber
feet help protect the IES-708-22A from shock or vibration and ensure space between
devices when stacking.
Figure 4 Attaching Rubber Feet
example
To Next Page
Loading...
