Chapter 51 Firmware and Configuration File Maintenance
IES-708-22A User’s Guide
323
51.3.1 Editable Configuration File Backup
Configure your system, and then use FTP to backup the plain-text configuration file onto your
computer. Do the following to backup the configuration file:
Use an FTP client to connect to the IES-708-22A.
Enter the management password (
1234 by default).
Use
get to transfer the configuration file to the computer. The configuration file on the system
(that you want to backup to the computer) is named
config-0.
Quit FTP.
51.3.2 Edit Configuration File
Open the config-0 file via Notepad (see the following example) and edit to a desired
configuration.
C:\> ftp <IES-708-22A IP address>
Type your user name and press [ENTER].
User (172.23.15.86:(none)): admin
Password: 1234
230 Logged in
ftp> get config-0
ftp> quit
To Next Page
Loading...
