ZyXEL Communications IES-22A - Page 222

Chapter 35 Access Control
IES-708-22A User’s Guide
222
reboot Send a message to the manager that the system
is going to reboot. The variable is the reason why
the system reboots.
STU-C:
1.3.6.1.4.1.890.1.5.5.7.1
STU-R:
1.3.6.1.4.1.890.1.5.5.8.1
overheat Send a message to the manager that the system
is overheated. The variable in the binding list is
the current temperature in Celsius of the system.
STU-C:
1.3.6.1.4.1.890.1.5.5.7.3
STU-R:
1.3.6.1.4.1.890.1.5.5.8.3
overheatOver Send a message to the manager that the
overheated condition is over. The variable in the
binding list is the current temperature in Celsius
of the system.
STU-C:
1.3.6.1.4.1.890.1.5.5.7.4
STU-R:
1.3.6.1.4.1.890.1.5.5.8.4
voltageOutOfRange Send a message to the manager that the voltage
of the system is out of range. The variable in the
binding list is the current voltage in volt of the
system.
STU-C:
1.3.6.1.4.1.890.1.5.5.7.8
STU-R:
1.3.6.1.4.1.890.1.5.5.8.8
voltageNormal Send a message to the manager that the low-
voltage condition is over. The variable in the
binding list is the current voltage in volt of the
system.
STU-C:
1.3.6.1.4.1.890.1.5.5.7.9
STU-R:
1.3.6.1.4.1.890.1.5.5.8.9
thermalSensorFailure The trap signifies that the thermal sensor failed. STU-C:
1.3.6.1.4.1.890.1.5.5.7.22
STU-R:
1.3.6.1.4.1.890.1.5.5.8.22
sysMacAntiSpoofing MAC Anti-spoofing. STU-C:
1.3.6.1.4.1.890.1.5.5.7.12.1.1
1
STU-R:
1.3.6.1.4.1.890.1.5.5.8.12.1.1
1
Table 76 SNMP Traps (continued)
TRAP NAME DESCRIPTION OID