ZyXEL Communications IES-22A - Page 258

Chapter 42 Commands
IES-708-22A User’s Guide
258
dhcprelay opt82sub2
disable
(STUC mode only) Turns off
option 82 sub-option 2
M/H
dhcprelay opt82sub2 set <relay info> (STUC mode only) Adds the
specified information for sub-
option 2
M/H
vlan show <vlanlist> Displays VLAN settings. M/L
vlan portshow [portlist] Displays the port(s) VLAN
settings.
M/L
vlan set <vid>
<portlist>:<F<T|U>|X|N>
[<portlist>:
<F<T|U>|X|N> ...] [name]
Configures a VLAN entry. H/H
vlan enable <vid> Turns on a VLAN entry. H/H
vlan disable <vid> Turns off a VLAN entry. H/H
vlan delete <vlanlist> Removes a VLAN entry. H/H
vlan pvid <portlist> <pvid> Sets the PVID (Port VLAN ID)
assigned to untagged frames or
priority frames (0 VID) received on
this port(s).
H/H
vlan priority <portlist> <priority> Sets a port’s default IEEE 802.1p
priority.
H/H
vlan gvrp <portlist>
<enable|disable>
(STUC mode only) Set the port(s)
to enable or disable gvrp.
H/H
vlan frametype <portlist> <all|tag> Sets the specified DSL port to
accept tagged, untagged or
Ethernet frames (or both).
Note: enet1, enet2 are fixed at
‘all’.
H/H
vlan cpu show Displays the VLAN ID of the
management VLAN.
M/~
vlan cpu set <vid> Sets the VLAN ID of the
management VLAN.
H/~
mac flush Clears learned MAC addresses
from the forwarding table.
H/H
mac agingtime show Displays the MAC aging out time
period.
M/L
mac agingtime set <sec,
10..10000|0:disabled>
Sets the MAC aging out time
period.
H/H
mac antispoofing show (STUC mode only) Show the MAC
antispoofing status
M/L
mac antispoofing enable (STUC mode only) Turns on the
MAC antispoofing
H/H
mac antispoofing disable (STUC mode only) Turns off the
MAC antispoofing
H/H
mac count show [portlist] (STUC mode only) Displays the
system’s current MAC address
count settings.
M/L
Table 89 Commands (continued)
CLASS COMMAND PARAMETERS DESCRIPTION P