ZyXEL Communications nwa series - 9.5 AC (AP Controller) Discovery

Chapter 19 Logs
NWA/WAC Series CLI Reference Guide
113
19.1.4 E-mail Profile Log Commands
This table lists the commands for the e-mail profile settings.
[no] logging syslog <1..4> address {ip | hostname} Sets the URL or IP address of the specified remote server.
The
no command clears this field.
hostname: You may up to 63 alphanumeric characters,
dashes (-), or periods (.), but the first character cannot be
a period.
[no] logging syslog <1..4> {disable | level normal |
level all}
Specifies what kind of information, if any, is logged for the
specified category.
[no] logging syslog <1..4> facility {local_1 |
local_2 | local_3 | local_4 | local_5 | local_6 |
local_7}
Sets the log facility for the specified remote server. The
no
command sets the facility to local_1.
[no] logging syslog <1..4> format {cef | vrpt} Sets the format of the log information.
cef: Common Event Format, syslog-compatible format.
vrpt: ZyXEL’s Vantage Report, syslog-compatible format.
Table 68 logging Commands: Remote Syslog Server Settings (continued)
COMMAND DESCRIPTION
Table 69 logging Commands: E-mail Profile Settings
COMMAND DESCRIPTION
show logging status mail Displays the current settings for the e-mail profiles.
[no] logging mail <1..2> Enables the specified e-mail profile. The no command
disables the specified e-mail profile.
[no] logging mail <1..2> address {ip | hostname} Sets the URL or IP address of the mail server for the
specified e-mail profile. The
no command clears the mail
server field.
hostname: You may up to 63 alphanumeric characters,
dashes (-), or periods (.), but the first character cannot be
a period.
logging mail <1..2> sending_now Sends mail for the specified e-mail profile immediately,
according to the current settings.
[no] logging mail <1..2> authentication Enables SMTP authentication. The
no command disables
SMTP authentication.
[no] logging mail <1..2> authentication username
username password password
Sets the username and password required by the SMTP
mail server. The
no command clears the username and
password fields.
username: You can use alphanumeric characters,
underscores (_), and dashes (-), and it can be up to 31
characters long.
password: You can use most printable ASCII characters.
You cannot use square brackets [ ], double quotation marks
(“), question marks (?), tabs or spaces. It can be up to 31
characters long.
[no] logging mail <1..2> {send-log-to | send-alerts-
to} e_mail
Sets the e-mail address for logs or alerts. The
no command
clears the specified field.
e_mail: You can use up to 63 alphanumeric characters,
underscores (_), or dashes (-), and you must use the @
character.