NWA/WAC Series CLI Reference Guide 94
CHAPTER 17
Authentication Objects
This chapter shows you how to select different authentication methods for user authentication using
the AAA servers or the internal user database.
17.1 Authentication Objects Overview
After you have created the AAA server objects, you can specify the authentication objects
(containing the AAA server information) that the NWA/WAC uses to authenticate users (such as
managing through HTTP/HTTPS or Captive Portal).
17.2 aaa authentication Commands
The following table lists the aaa authentication commands you use to configure an
authentication profile.
Table 58 aaa authentication Commands
COMMAND DESCRIPTION
aaa authentication rename
profile-name-old profile-name-
new
Changes the profile name.
profile-name: You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
clear aaa authentication profile-
name
Deletes all authentication profiles or the specified authentication
profile.
Note: You can NOT delete a profile that is currently in use.
show aaa authentication {group-
name|default}
Displays the specified authentication server profile settings.
[no] aaa authentication profile-
name
Sets a descriptive name for the authentication profile. The
no
command deletes a profile.
[no] aaa authentication {profile-
name} local
Creates an authentication profile to authenticate users using the
local user database
To Next Page
Loading...
