NWA/WAC Series CLI Reference Guide 126
CHAPTER 24
Diagnostics
This chapter covers how to use the diagnostics feature.
24.1 Diagnostics Overview
The diagnostics feature provides an easy way for you to generate a file containing the NWA/WAC’s
configuration and diagnostic information. You may need to generate this file and send it to
customer support during troubleshooting.
24.2 Diagnosis Commands
The following table lists the commands that you can use to have the NWA/WAC collect diagnostics
information. Use the
configure terminal command to enter the configuration mode to be able
to use these commands.
24.2.1 Diagnosis Commands Example
The following example creates a diagnostic file and displays its name, size, and creation date.
Table 79 diagnosis Commands
COMMAND DESCRIPTION
diag-info collect Has the NWA/WAC create a new diagnostic file.
show diag-info Displays the name, size, and creation date (in yyyy-mm-dd hh:mm:ss format) of the
diagnostic file.
Router# configure terminal
Router(config)# diag-info collect
Please wait, collecting information
Router(config)# show diag-info
Filename : diaginfo-20070423.tar.bz2
File size : 1259 KB
Date : 2007-04-23 09:55:09
To Next Page
Loading...
