ZyXEL Communications nwa series - Reboot

Chapter 20 Reports and Reboot
NWA/WAC Series CLI Reference Guide
120
This displays the email daily report settings and has the NWA/WAC send the report now.
20.3 Reboot
Use this to restart the device (for example, if the device begins behaving erratically).
If you made changes in the CLI, you have to use the
write command to save the configuration
before you reboot. Otherwise, the changes are lost when you reboot.
Use the
reboot command to restart the device.
Router(config)# show daily-report status
email daily report status
=========================
activate: no
scheduled time: 00:00
reset counter: no
smtp address:
smtp port: 25
smtp auth: no
smtp username:
smtp password:
mail subject:
append system name: no
append date time: no
mail from:
mail-to-1:
mail-to-2:
mail-to-3:
mail-to-4:
mail-to-5:
cpu-usage: yes
mem-usage: yes
port-usage: yes
ap-sta: no
ap-traffic: no
Router(config)#