ZyXEL Communications nwa series - Object Reference; Chapter 3 Object Reference; Object Reference Commands

NWA/WAC Series CLI Reference Guide 29
CHAPTER 3
Object Reference
This chapter describes how to use object reference commands.
3.1 Object Reference Commands
The object reference commands are used to see which configuration settings reference a specific
object. You can use this table when you want to delete an object because you have to remove
references to the object first.
Table 6 show reference Commands
COMMAND DESCRIPTION
show reference object username
[username]
Displays which configuration settings reference the specified user
object.
show reference object aaa
authentication [default | profile]
Displays which configuration settings reference the specified AAA
authentication object.
show reference object ca category
{local|remote} [cert_name]
Displays which configuration settings reference the specified
authentication method object.
show reference object [wlan-radio-
profile]
Displays the specified radio profile object.
show reference object [wlan-
monitor-profile]
Displays the specified monitor profile object.
show reference object [wlan-ssid-
profile]
Displays the specified SSID profile object.
show reference object [wlan-
security-profile]
Displays the specified security profile object.
show reference object [wlan-
macfilter-profile]
Displays the specified macfilter profile object.