NWA/WAC Series CLI Reference Guide 116
CHAPTER 20
Reports and Reboot
This chapter provides information about the report associated commands and how to restart the
NWA/WAC using commands. It also covers the daily report e-mail feature.
20.1 Report Commands Summary
The following sections list the report and session commands.
20.1.1 Report Commands
This table lists the commands for reports.
Table 72 report Commands
COMMAND DESCRIPTION
[no] report Begins data collection. The no command stops data
collection.
show report status Displays whether or not the NWA/WAC is collecting data
and how long it has collected data.
clear report [interface_name] Clears the report for the specified interface or for all
interfaces.
show report [interface_name {ip | service | url}] Displays the traffic report for the specified interface and
controls the format of the report. Formats are:
ip - traffic by IP address and direction
service - traffic by service and direction
url - hits by URL
To Next Page
Loading...
