IMPORTANT!
READ CAREFULLY BEFORE USE.
KEEP THIS GUIDE FOR FUTURE REFERENCE.
This is a Reference Guide for a series of products intended for people who want to configure the NWA/
WAC via Command Line Interface (CLI).
Some commands or command options in this guide may not be available in your
product. See your product's User’s Guide for a list of supported features. Every effort
has been made to ensure that the information in this guide is accurate.
How To Use This Guide
1 Read Chapter 1 on page 13 for how to access and use the CLI (Command Line Interface).
2 Read Chapter 2 on page 24 to learn about the CLI user and privilege modes.
Do not use commands not documented in this guide.
Related Documentation
• Quick Start Guide
The Quick Start Guide shows how to connect the NWA/WAC and access the Web Configurator.
• User’s Guide
The User’s Guide explains how to use the Web Configurator to configure the NWA/WAC.
It is recommended you use the Web Configurator to configure the NWA/WAC.
To Next Page
Loading...
