Chapter 2 User and Privilege Modes
NWA/WAC Series CLI Reference Guide
26
if there is a Linux equivalent, it is displayed in this chapter for your reference. You must know a
command listed here well before you use it. Otherwise, it may cause undesired results.
Table 5 Debug Commands
COMMAND SYNTAX DESCRIPTION LINUX COMMAND EQUIVALENT
debug app show l7protocol (*) Shows app patrol protocol list > cat /etc/l7_protocols/
protocol.list
debug ca (*) Certificate debug commands
debug device-ha (*) Device HA debug commands
debug gui (*) Web Configurator related debug commands
debug hardware (*) Hardware debug commands
debug interface Interface debug commands
debug interface ifconfig Shows system interfaces detail > ifconfig [interface]
debug ip dns DNS debug commands
debug logging System logging debug commands
debug manufacture Manufacturing related debug commands
debug network arpignore (*) Enable/Display the ignoring of ARP responses
for interfaces which don't own the IP address
cat /proc/sys/net/ipv4/conf/
*/arp_ignore
debug policy-route (*) Policy route debug command
debug [cmdexec|corefile|ip
|kernel|mac-id-
rewrite|observer|switch
|system|zyinetpkt] (*)
ZLD internal debug commands
To Next Page
Loading...
