ZyXEL Communications nwa series - Page 87

Chapter 15 System Remote Management
NWA/WAC Series CLI Reference Guide
87
[no] snmp-server location description Sets the geographic location (of up to 60 characters) for
the NWA/WAC. The
no command removes the
geographic location for the NWA/WAC.
[no] snmp-server port <1..65535> Sets the SNMP service port number. The
no command
resets the SNMP service port number to the factory
default (
161).
Table 53 Command Summary: SNMP (continued)
COMMAND DESCRIPTION