ZyXEL Communications P-660R-T1 - Page 198

P-660 series Support Notes
197
All contents copyright © 2005 ZyXEL Communications Corporation.
lan dhcp server leasetime [second] Set DHCP lease time Menu 3.2
lan dhcp server renewaltime [second] Set DHCP renew time Menu 3.2
lan dhcp server rebindtime [second] Set DHCP rebind time Menu 3.2
lan dhcp relay server [IP address] Set IP address of DHCP relay server Menu 3.2
lan display Display LAN or IP alias parameters Display Menu 3
lan clear Clear the Working Buffer
lan save Save LAN related parameters
wan node index [1-8]
Set the node pointer to specific wan
profile. If you want to set WAN profile,
please use this command first, system
will use the index number for pointing to
specific PVC (remote node), and for
consequent commands reference, if index
= 1 means it? ISP node
Menu 11.1
wan node clear
Clear the parameters of the temporary
WAN profile
Menu 11.1
wan node ispname [ISP name] Enable the name of wan node Menu 11.1
wan node enable Enable the wan profile Menu 11.1
wan node disable Disable the wan profile Menu 11.1
wan node encap
[1483|pppoa|pppoe|enet]
Set the wan protocol
Menu 11.1
wan node mux [vc|llc] Set the wan multiplex Menu 11.1
wan node ppp authen [chap|pap|both] Set PPP authentication type Menu 11.1
wan node ppp username [name] Set PPP username Menu 11.1
wan node ppp password [password] Set PPP password Menu 11.1
wan node service [name] Set PPPoE service name Menu 11.1
wan node bridge [on|off]
Set the wan bridge mode
Menu 11.1
wan node routeip [on|off]
Set the wan IP routing mode
Menu 11.1
wan node callsch
[set1#][set2#][set3#][set4#]
Set call schedule set, set number 0 means
empty
Menu 11.1
wan node nailedup [on|off] Set nailed up connection on/off Menu 11.1
wan node vpi [num] Set the wan vpi. Range : 0~255 Menu 11.6
wan node vci [num] Set the wan vci. Range : 32~65535 Menu 11.6
wan node qos[ubr|cbr]
Set the wan QOS type to be UBR or
CBR
Menu 11.6
wan node pcr [num] Set the wan PCR value Menu 11.6
wan node scr [num] Set the wan SCR value Menu 11.6
wan node mbs [num] Set the wan MBS value Menu 11.6