EasyManua.ls Logo

ZyXEL Communications USG40W - Page 202

ZyXEL Communications USG40W
1090 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 7 Monitor
ZyWALL USG Series User’s Guide
202
IP Assignment This field displays how the interface gets its IP address.
Static - This interface has a static IP address.
DHCP Client - This interface gets its IP address from a DHCP server.
Services This field lists which services the interface provides to the network. Examples include DHCP
relay, DHCP server, DDNS, RIP, and OSPF. This field displays n/a if the interface does not provide
any services to the network.
Action Use this field to get or to update the IP address for the interface. Click Renew to send a new
DHCP request to a DHCP server. Click Connect to try to connect a PPPoE/PPTP interface. If the
interface cannot use one of these ways to get or to update its IP address, this field displays n/a.
Tunnel Interface Status
This displays the details of the Zyxel Device’s configured tunnel interfaces.
Name This field displays the name of the interface.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
Zone This field displays the zone to which the interface is assigned.
IP Address This is the IP address of the interface. If the interface is active (and connected), the Zyxel
Device tunnels local traffic sent to this IP address to the Remote Gateway Address.
My Address This is the interface or IP address uses to identify itself to the remote gateway. The Zyxel Device
uses this as the source for the packets it tunnels to the remote gateway.
Remote
Gateway
Address
This is the IP address or domain name of the remote gateway to which this interface tunnels
traffic.
Mode This field displays the tunnel mode that you are using.
IPv6 Interface Status
If an Ethernet interface does not have any physical ports associated with it, its entry is displayed in light gray text.
Name This field displays the name of each interface. If there is an Expand icon (plus-sign) next to the
name, click this to look at the status of virtual interfaces on top of this interface.
Port This field displays the physical port number.
Table 38 Monitor > System Status > Interface Status (continued)
LABEL DESCRIPTION

Table of Contents

Other manuals for ZyXEL Communications USG40W

Related product manuals