The Quality effects on the size of recorded data size and picture quality. Low quality setting
has a smaller recording data size but also has low image quality. Higher resolution has a
clear image but requires large recording data size. When you setup the recording
configuration you must consider the quality setting and storage retention required.
‘INTENSIVE’ the user can set the recording speed when an event is triggered. The user
can set a different frame rate for this situation.
‘PREALARM’ the user can change the duration that the DVR will record before an event is
triggered, this can be set up to 5 seconds.
‘POST ALARM’ this is the time that the record continues after an event is triggered. This
can be set up to a Max. 30 seconds.
.
To Next Page
Loading...
