H7016 User Manual
4-30
Port Numbers: The Default ports are in the picture below, if you need to use different ports
then make sure the same port numbers correspond on the remote software.
Transfer speed: The user can define network transmission allowance (bandwidth) from
25kbps to 100Mbps. Low bandwidth will also reduce the number of network fps.
DDNS
The DDNS function allows the user to enter a fixed DDNS name when the DVR is using a
dynamic ip address. This service is useful for when connecting over the WAN, as most ISP
companies will charge extra for a line with static IP.
DDNS server
DDNS server: In this field enter the server name of DDNS service you wish to use. The
Default on the DVR – CCTV-LINK.NET.
Host Name: Enter the registered host name of the DDNS account
To Next Page
Loading...
