1-2
Switch
Input
power
supply
Number of
electrical
ports
supplying
power
Maximum
PoE
distance
Maximum power
provided by
each electrical
port
Total
Maximum
PoE output
power
Switch 4210 PWR
18-Port
AC input 16 135 W
DC input 400 W
Switch 4210 PWR
26-Port
AC input
24
370 W
A PoE-enabled Switch 4210 has the following features:
z As the PSE, it supports the IEEE802.3af standard. It can also supply power to PDs that do not
support the 802.3af standard.
z It can deliver data and current simultaneously through data wires (1,2,3,6) of category-3/5 twisted
pairs.
z The PSE processing software on the switch can be upgraded online.
z The switch provides statistics about power supplying on each port and the whole equipment, which
you can query through the display command.
z The switch provides two modes (auto and manual) to manage the power feeding to ports in the
case of PSE power overload.
z The switch provides over-temperature protection mechanism. Using this mechanism, the switch
disables the PoE feature on all ports when its internal temperature exceeds 65°C (149°F) for
self-protection, and restores the PoE feature on all its ports when the temperature drops below
60°C (140°F).
z The switch supports the PoE profile feature, that is, different PoE policies can be set for different
user groups. These PoE policies are each saved in the corresponding PoE profile and applied to
ports of the user groups.
To Next Page
Loading...