3Com 4210 9-Port - Displaying and Maintaining Management VLAN Configuration

1-4
[SwitchA-Vlan-interface10] ip address 1.1.1.1 255.255.255.0
[SwitchA-Vlan-interface10] quit
# Configure the default route.
[SwitchA] ip route-static 0.0.0.0 0.0.0.0 1.1.1.2
Displaying and Maintaining management VLAN configuration
Table 1-2 Displaying and Maintaining management VLAN configuration
Operation Command Remarks
Display the IP-related information
about a management VLAN
interface
display ip interface
[ Vlan-interface vlan-id ]
Display brief configuration
information about a management
VLAN interface
display ip interface brief
[ Vlan-interface [ vlan-id ] ]
Display the information about a
management VLAN interface
display interface Vlan-interface
[ vlan-id ]
Display summary information
about the routing table
display ip routing-table [ | { begin |
exclude | include }
regular-expression ]
Display detailed information about
the routing table
display ip routing-table verbose
Display the routes leading to a
specified IP address
display ip routing-table ip-address
[ mask ] [ longer-match ] [ verbose ]
Display the routes leading to a
specified IP address range
display ip routing-table
ip-address1 mask1 ip-address2
mask2 [ verbose ]
Display the routing information of
the specified protocol
display ip routing-table protocol
protocol [ inactive | verbose ]
Display the routes that match a
specified basic access control list
(ACL)
display ip routing-table acl
acl-number [ verbose ]
Display the routing table in a tree
structure
display ip routing-table radix
Display the statistics on the routing
table
display ip routing-table statistics
Optional
Available in any view.
Clear statistics about a routing
table
reset ip routing-table statistics
protocol { all | protocol }
Use the reset
command in user view
Delete all static routes
delete static-routes all
Use the delete
command in system
view.