3Com 4210 9-Port - IP Address Configuration Examples; IP Address Configuration Example

1-4
Table 1-3 Display IP addressing configuration
Operation Command Remarks
Display information about a
specified or all Layer 3 interfaces
display ip interface
[ interface-type interface-number ]
Display brief configuration
information about a specified or all
Layer 3 interfaces
display ip interface brief
[ interface-type
[ interface-number ] ]
Available in any view
IP Address Configuration Examples
IP Address Configuration Example I
Network requirement
Assign IP address 129.2.2.1 with mask 255.255.255.0 to VLAN interface 1 of the switch.
Network diagram
Figure 1-3 Network diagram for IP address configuration
Configuration procedure
# Configure an IP address for VLAN interface 1.
<Switch> system-view
[Switch] interface Vlan-interface 1
[Switch-Vlan-interface1] ip address 129.2.2.1 255.255.255.0