3Com 4210 9-Port - Logging out a Web User; Configuration Example

8-6
To do… Use the command… Remarks
Enter system view
system-view
—
Create a basic ACL or enter
basic ACL view
acl number acl-number
[ match-order { config | auto } ]
As for the acl number
command, the config keyword
is specified by default.
Define rules for the ACL
rule [ rule-id ] { deny | permit }
[ rule-string ]
Required
Quit to system view
quit
—
Apply the ACL to control
Web users
ip http acl acl-number
Optional
By default, no ACL is applied
for Web users.
Logging Out a Web User
The administrator can log out a Web user using the related command.
Follow the step below to log out a Web user:
To do… Use the command… Remarks
Log out a Web user
free web-users { all | user-id user-id |
user-name user-name }
Required
Available in user view
Configuration Example
Network requirements
Only the Web users sourced from the IP address of 10.110.100.52 are permitted to access the switch.
Network diagram
Figure 8-3 Network diagram for controlling Web users using ACLs
Switch
10.110.100.46
Host A
IP network
Host B
10.110.100.52
Configuration procedure
# Define a basic ACL.
<Sysname> system-view
[Sysname] acl number 2030
[Sysname-acl-basic-2030] rule 1 permit source 10.110.100.52 0