1-5
Displaying Device Configuration
After the above configuration, you can execute the display command in any view to display the current
and initial configurations of the device, so as to verify your configuration.
Table 1-5 Display Device Configuration
Operation Command Description
Display the initial configuration file
saved in the storage device
display saved-configuration [ unit
unit-id ] [ by-linenum ]
Display the configuration file used
for this and next startup
display startup [ unit unit-id ]
Display the current VLAN
configuration of the device
display current-configuration vlan
[ vlan-id ] [ by-linenum ]
Display the validated configuration in
current view
display this [ by-linenum ]
Display current configuration
display current-configuration
[ configuration [ configuration-type ] |
interface [ interface-type ]
[ interface-number ] ] [ by-linenum ] [ |
{ begin | exclude | include }
regular-expression ]
You can execute
the display
command in any
view.
To Next Page
Loading...