2-1
2 PoE Profile Configuration
Introduction to PoE Profile
On a large-sized network or a network with mobile users, to help network administrators to monitor the
PoE features of the switch, Switch 4210 provide the PoE profile features. A PoE profile is a set of PoE
configurations, including multiple PoE features.
Features of PoE profile:
z Various PoE profiles can be created. PoE policy configurations applicable to different user groups
are stored in the corresponding PoE profiles. These PoE profiles can be applied to the ports used
by the corresponding user groups.
z When users connect a PD to a PoE-profile-enabled port, the PoE configurations in the PoE profile
will be enabled on the port.
PoE Profile Configuration
Configuring PoE Profile
Table 2-1 Configure PoE profile
Operation Command Description
Enter system view
system-view
—
Create a PoE profile and enter PoE
profile view
poe-profile profilename
Required
If the PoE file is created,
you will enter PoE profile
view directly through the
command.
Enable the PoE feature
on a port
poe enable
Required
Disabled by default.
Configure PoE mode for
Ethernet ports
poe mode { signal |
spare }
Optional
signal by default.
Configure the PoE priority
for Ethernet ports
poe priority { critical |
high | low }
Optional
low by default.
Configure
the relevant
features in
PoE profile
Configure the maximum
power for Ethernet ports
poe max-power
max-power
Optional
15,400 mW by default.
Quit system view
quit
—
To Next Page
Loading...