3Com 4210 9-Port - Page 547

1-3
Operation Command Description
Set an
SNMP
group
snmp-agent group { v1 |
v2c } group-name [ read-view
read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl acl-number ]
Indirect
configura
tion
Add a user
to an
SNMP
group
snmp-agent usm-user { v1 |
v2c } user-name group-name
[ acl acl-number ]
configuration.
z Indirect configuration is
compatible with
SNMPv3. The added
user is equal to the
community name for
SNMPv1 and
SNMPv2c.
z You can choose either
of them as needed.
Set the maximum size of an SNMP
packet for SNMP agent to receive or
send
snmp-agent packet
max-size byte-count
Optional
1,500 bytes by default.
Set the device engine ID
snmp-agent local-engineid
engineid
Optional
By default, the device
engine ID is “enterprise
number + device
information”.
Create/Update the view information
snmp-agent mib-view
{ included | excluded }
view-name oid-tree [ mask
mask-value ]
Optional
By default, the view name
is “ViewDefault” and OID is
1.
Table 1-2 Configure basic SNMP functions (SNMPv3)
Operation Command Description
Enter system view
system-view
—
Enable SNMP agent
snmp-agent
Optional
Disabled by default.
You can enable SNMP agent by
executing this command or any of the
commands used to configure SNMP
agent.
Set system information
and specify to enable
SNMPv3 on the switch
snmp-agent sys-info { contact
sys-contact | location
sys-location | version { { v1 |
v2c | v3 }* | all } }
Required
By default, the contact information for
system maintenance is " 3Com
Corporation. ", the system location is
" Marlborough, MA 01752 USA ", and
the SNMP version is SNMPv3.
Set an SNMP group
snmp-agent group v3
group-name [ authentication |
privacy ] [ read-view
read-view ] [ write-view
write-view ] [ notify-view
notify-view ] [ acl acl-number ]
Required
Encrypt a plain-text
password to generate a
cipher-text one
snmp-agent
calculate-password
plain-password mode { md5 |
sha } { local-engineid |
specified-engineid engineid }
Optional
This command is used if password in
cipher-text is needed for adding a
new user.