1-6
To do… Use the command… Remarks
Configure the maximum
number of history records that
can be saved
history-records number
Optional
By default, the maximum
number is 50.
Enable history record
history-record enable
Optional
By default, history record is not
enabled.
Configure the retaining time of
history record
history keep-time keep-time
Optional
By default, the retaining time of
history record is 120 minutes.
Configure statistics interval and
the maximum number of
retained statistics information
statistics { interval interval |
max-group number }
Optional
By default, statistics interval is
120 minutes and up to two
pieces of statistics information
can be retained.
Configure the retaining time of
statistics information
statistics keep-time keep-time
Optional
By default, the retaining time of
statistics information is 120
minutes.
Configure test start time and
lifetime
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now } lifetime
lifetime
Optional
By default,no test start time and
lifetime is configured.
Enable routing table bypass
sendpacket passroute
Optional
By default, routing table bypass
is disabled.
Configure the TTL
ttl number
Optional
By default, TTL is 20.
The sendpacket passroute
command voids the ttl
command.
Configure the automatic test
interval
frequency interval
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test will
be made.
Configure the probe timeout
time
timeout time
Optional
By default, a probe times out in
three seconds.
Configure the type of service
(ToS)
tos value
Optional
By default, the service type is
zero.
Start the test
test-enable
Required
Display test results
display remote-ping results
[ admin-name operation-tag ]
Required
Available in any view.
To Next Page
Loading...