3Com 4210 9-Port - Page 723

1-10
To do… Use the command… Remarks
Configure size of a file
to be uploaded in an
FTP test
filesize file-size
Required
By default, the file is 1 MB.
Start the test
test-enable
Required
Display test results
display remote-ping results
[ admin-name operation-tag ]
Required
You can execute the command in any
view.
4) Configuring HTTP test on remote-ping client
Follow these steps to configure HTTP test on remote-ping client:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the remote-ping client
function
remote-ping-agent enable
Required
By default, the remote-ping
client function is disabled.
Create a remote-ping test
group and enter its view
remote-ping
administrator-name
operation-tag
Required
By default, no test group is
configured.
Configure the destination IP
address
destination-ip ip-address
Required
You can configure an IP
address or a host name.
By default, no destination
address is configured.
Configure dns-server
dns-server ip-address
Required when you use the
destination-ip command to
configure the destination
address as the host name.
By default, no IP address of the
DNS server is configured.
Configure the source IP
address
source-ip ip-address
Optional
By default, no source IP
address is configured.
Configure the source port source-port port-number
Optional
By default, no source port is
configured.
Configure the test type
test-type http
Required
By default, the test type is
ICMP.
Configure the number of
probes per test
count times
Optional
By default, each test makes
one probe.
Configure a test description
description string
Optional
By default, no description
information is configured.