2-3
Use the reset command in user view to clear the IP, TCP, and UDP traffic statistics.
Table 2-4 Display and maintain IP performance
Operation Command Remarks
Display TCP connection status
display tcp status
Display TCP connection statistics
display tcp statistics
Display UDP traffic statistics
display udp statistics
Display IP traffic statistics
display ip statistics
Display ICMP traffic statistics
display icmp statistics
Display the current socket
information of the system
display ip socket [ socktype
sock-type ] [ task-id socket-id ]
Display the forwarding information
base (FIB) entries
display fib
Display the FIB entries matching
the destination IP address
display fib ip-address1 [ { mask1 |
mask-length1 } [ ip-address2
{ mask2 | mask-length2 } | longer ]
| longer ]
Display the FIB entries filtering
through a specific ACL
display fib acl number
Display the FIB entries in the buffer
which begin with, include or
exclude the specified character
string.
display fib | { begin | include |
exclude } regular-expression
Display the total number of the FIB
entries
display fib statistics
You can execute the
display command in any
view.
Clear IP traffic statistics
reset ip statistics
Clear TCP traffic statistics
reset tcp statistics
Clear UDP traffic statistics
reset udp statistics
You can execute the
reset command in user
view.
To Next Page
Loading...