CLI Views 15
Ethernet port
view
Configure Ethernet port
parameters
100 Mbps Ethernet
port view:
[4210-Ethernet1/0/1]
Execute the interface
ethernet command in
system view.
Execute the quit command to
return to system view.
Execute the return command
to return to user view.
1000 Mbps Ethernet
port view:
[4210-GigabitEthern
et1/1/1]
Execute the interface
gigabitethernet
command in system
view.
VLAN view Configure VLAN parameters [4210-vlan1] Execute the vlan
command in system
view.
VLAN interface
view
Configure VLAN interface
parameters
[4210-Vlan-interface
1]
Execute the interface
Vlan-interface
command in system
view.
Loopback
interface view
Configure loopback interface
parameters
[4210-LoopBack0] Execute the interface
loopback command in
system view.
NULL interface
view
Configure NULL interface
parameters
[4210-NULL0] Execute the interface
null command in system
view.
Local user view Configure local user
parameters
[4210-luser-user1] Execute the local-user
command in system
view.
User interface
view
Configure user interface
parameters
[4210-ui-aux0] Execute the
user-interface
command in system
view.
FTP client view Configure FTP client
parameters
[ftp] Execute the ftp
command in user view.
SFTP client view Configure SFTP client
parameters
sftp-client> Execute the sftp
command in system
view.
MST region view Configure MST region
parameters
[4210-mst-region] Execute the stp
region-configuration
command in system
view.
Cluster view Configure cluster parameters [4210-cluster] Execute the cluster
command in system
view.
Public key view Configure the RSA public key
for SSH users
[4210-rsa-public-key] Execute the rsa
peer-public-key
command in system
view.
Execute the peer-public-key
end command to return to
system view.
Configure the RSA or DSA
public key for SSH users
[4210-peer-public-ke
y]
Execute the public-key
peer command in
system view.
Public key editing
view
Edit the RSA public key for
SSH users
[4210-rsa-key-code] Execute the
public-key-code begin
command in public key
view.
Execute the public-key-code
end command to return to
public key view.
Edit the RSA or DSA public
key for SSH users
[4210-peer-key-code
]
Table 4 CLI views
View Available operation Prompt example Enter method Quit method
To Next Page
Loading...
