Cluster Configuration Tasks 325
Cluster Configuration
Task s
Before configuring a cluster, you need to determine the roles and functions the
switches play. You also need to configure the related functions, preparing for the
communication between devices within the cluster.
Configuring the
Management Device
Management device configuration tasks
n
To reduce the risk of being attacked by malicious users against opened socket and
enhance switch security, the Switch 4210 provides the following functions, so that
a cluster socket is opened only when it is needed:
■ Opening UDP port 40000 (used for cluster) only when the cluster function is
implemented,
■ Closing UDP port 40000 at the same time when the cluster function is closed.
On the management device, the preceding functions are implemented as follows:
■ When you create a cluster by using the build or auto-build command, UDP
port 40000 is opened at the same time.
■ When you remove a cluster by using the undo build or undo cluster enable
command, UDP port 40000 is closed at the same time.
Enabling NDP globally and on specific ports
Tab le 240 Cluster configuration tasks:
Configuration task Remarks
“Configuring the Management Device” Required
“Configuring Member Devices” Required
“Managing a Cluster through the
Management Device”
Optional
“Configuring the Enhanced Cluster Features” Optional
Tab le 241 Management device configuration tasks
Operation Description Related section
Enable NDP globally and on
specific ports
Required “Enabling NDP globally and
on specific ports”
Configure NDP-related
parameters
Optional “Configuring NDP-related
parameters”
Enable NTDP globally and on
a specific port
Required “Enabling NTDP globally and
on a specific port”
Configure NTDP-related
parameters
Optional “Configuring NTDP-related
parameters”
Enable the cluster function Required “Enabling the cluster
function”
Configure cluster parameters Required “Configuring cluster
parameters”
Tab le 242 Enable NDP globally and on specific ports
Operation Command Description
Enter system view system-view -
To Next Page
Loading...
