14 CHAPTER 1: CLI CONFIGURATION
This allows general Telnet users to use the tftp get command to download file
bootrom.btm and other files from TFTP server 192.168.0.1 and other TFTP servers.
CLI Views CLI views are designed for different configuration tasks. When you first log into
the switch, you are in user view, where you can perform simple operations such as
checking the operation status and statistics information of the switch. To enter the
system view, execute the system-view command.
Table 4 lists the CLI views provided by the Switch 4210 Family, operations that can
be performed in each view, and the commands used to enter each view.
Tab le 4 CLI views
View Available operation Prompt example Enter method Quit method
User view Display operation status and
statistical information of the
switch
<4210> Enter user view once
logging into the switch.
Execute the quit command to
log out of the switch.
System view Configure system
parameters
[4210] Execute the
system-view command
in user view.
Execute the quit or return
command to return to user
view.
To Next Page
Loading...
