438 CHAPTER 38: FTP AND SFTP CONFIGURATION
Password:
230 User logged in.
[ftp]
# Enter the authorized directory on the FTP server.
[ftp] cd switch
# Execute the put command to upload the configuration file named config.cfg to
the FTP server.
[ftp] put config.cfg
# Execute the get command to download the file named switch.bin to the Flash
memory of the switch.
[ftp] get switch.bin
# Execute the quit command to terminate the FTP connection and return to user
view.
[ftp] quit
<4210>
# After downloading the file, use the boot boot-loader command to specify the
downloaded file (switch.bin) to be the application for next startup, and then
restart the switch. Thus the switch application is upgraded.
<4210> boot boot-loader switch.bin
<4210> reboot
n
For information about the boot boot-loader command and how to specify the
startup file for a switch, refer to
“Basic System Configuration and Debugging” on
page 483.
SFTP Configuration
SFTP Configuration: A
Switch Operating as an
SFTP Server
Enabling an SFTP server
Before enabling an SFTP server, you need to enable the SSH server function and
specify the service type of the SSH user as SFTP or all. For details, see the SSH
Server Configuration section of this manual.
Tabl e 333 SFTP configuration tasks
Item Configuration task Description
“SFTP Configuration: A
Switch Operating as an SFTP
Server”
“Enabling an SFTP server” Required
“Configuring connection idle
time”
Optional
“Supported SFTP client
software”
-
“SFTP Configuration: A
Switch Operating as an SFTP
Client”
“Basic configurations on an
SFTP client”
-
To Next Page
Loading...
