Introduction to AAA Services 243
Figure 80 depicts the format of attribute 26. The Vendor-ID field used to identify a
vendor occupies four bytes, where the first byte is 0, and the other three bytes are
defined in RFC 1700. Here, the vendor can encapsulate multiple customized
sub-attributes (containing vendor-specific Type, Length and Value) to implement a
RADIUS extension.
Figure 80 Vendor-specific attribute format
Type
ĂĂ
Length
0
7
Vendor-ID
715 31
Vendor-ID Type (specified ) Length (specified)
Specified attribute valueĂĂ
To Next Page
Loading...
