SNMP Configuration Examples 359
[4210] snmp-agent trap enable standard authentication
[4210] snmp-agent trap enable standard coldstart
[4210] snmp-agent trap enable standard linkup
[4210] snmp-agent trap enable standard linkdown
[4210] snmp-agent target-host trap address udp-domain 10.10.10.1 udp
-port 5000 params securityname public
Configuring the NMS
The Switch 4210 supports 3Com’s Netork Management System (NMS). SNMPv3
adopts user name and password authentication. When you use 3Com’s NMS, you
need to set user names and choose the security level in [Authentication
Parameter]. For each security level, you need to set authorization mode,
authorization password, encryption mode, encryption password, and so on. In
addition, you need to set timeout time and maximum retry times.
You can query and configure an Ethernet switch through the NMS. For more
information, refer to the corresponding documentation provided by the NMS
product.
n
Authentication-related configuration on an NMS must be consistent with that of
the devices for the NMS to manage the devices successfully.
To Next Page
Loading...
