RMON Configuration Examples 365
[4210-Ethernet1/0/1] rmon statistics 1
[4210-Ethernet1/0/1] quit
# Add the event entries numbered 1 and 2 to the event table, which will be trigg
ered
by the following extended alarm.
[4210] rmon event 1 log
[4210] rmon event 2 trap 10.21.30.55
# Add an entry numbered 2 to the extended alarm table to allow the system to
calculate the alarm variables with the
(.1.3.6.1.2.1.16.1.1.1.9.1+.1.3.6.1.2.1.16.1.1.1.10.1) formula to get the numbers
of all the oversize and undersize packets received by Ethernet 1/0/1 that are in
correct data format and sample it in every 10 seconds. When the change ratio
between samples reaches the rising threshold of 50, event 1 is triggered; when the
change ratio drops under the falling threshold, event 2 is triggered.
[4210] rmon prialarm 2 (.1.3.6.1.2.1.16.1.1.1.9.1+.1.3.6.1.2.1.16.1.1.1.10.1)
test 10 changeratio rising_threshold 50 1 falling_threshold 5 2 entrytype fo
rever
owner user1
# Display the RMON extended alarm entry numbered 2.
[4210] display rmon prialarm 2
Prialarm table 2 owned by user1 is VALID.
Samples type : changeratio
Variable formula : (.1.3.6.1.2.1.16.1.1.1.9.1+.1.3.6.1.2.1.16.1.1.1.10.1)
Description : test
Sampling interval : 10(sec)
Rising threshold : 100(linked with event 1)
Falling threshold : 10(linked with event 2)
When startup enables : risingOrFallingAlarm
This entry will exist : forever.
Latest value : 0
To Next Page
Loading...
