480 CHAPTER 41: BOOT ROM AND HOST SOFTWARE LOADING
c Enable FTP service on the switch, and configure the FTP user name to test and
password to pass.
[4210-Vlan-interface1] quit
[4210] ftp server enable
[4210] local-user test
New local user added.
[4210-luser-test] password simple pass
[4210-luser-test] service-type ftp
d Enable FTP client software on the PC. Refer to Figure 166 for the command line
interface in Windows operating system.
Figure 166 Command line interface
e Use the cd command on the interface to enter the path that the Boot ROM
upgrade file is to be stored. Assume the name of the path is D:Bootrom, as
shown in
Figure 167.
To Next Page
Loading...
