3Com 4210 PWR - Page 49

Telnet Configuration with Authentication Mode Being Scheme 47
n
Refer to “AAA Configuration” on page 245 and “SSH Configuration” on page 387
for information about AAA, RADIUS, and SSH.
Tab le 23 Determine the command level when users logging into switches are
authenticated in the scheme mode
Scenario Command level
Authentication
mode
User type Command
authentication-
mode scheme [
command-auth
orization ]
VTY users that
are
AAA&RADIUS
authenticated
or locally
authenticated
The user privilege level level
command is not executed, and the
service-type command does not
specify the available command level.
Level 0
The user privilege level level
command is not executed, and the
service-type command specifies the
available command level.
Determined by
the
service-type
command
The user privilege level level
command is executed, and the
service-type command does not
specify the available command level.
Level 0
The user privilege level level
command is executed, and the
service-type command specifies the
available command level.
Determined by
the
service-type
command
VTY users that
are
authenticated in
the RSA mode
of SSH
The user privilege level level
command is not executed, and the
service-type command does not
specify the available command level.
Level 0
The user privilege level level
command is not executed, and the
service-type command specifies the
available command level.
The user privilege level level
command is executed, and the
service-type command does not
specify the available command level.
Determined by
the user
privilege level
level command
The user privilege level level
command is executed, and the
service-type command specifies the
available command level.
VTY users that
are
authenticated in
the password
mode of SSH
The user privilege level level
command is not executed, and the
service-type command does not
specify the available command level.
Level 0
The user privilege level level
command is not executed, and the
service-type command specifies the
available command level.
Determined by
the
service-type
command
The user privilege level level
command is executed, and the
service-type command does not
specify the available command level.
Level 0
The user privilege level level
command is executed, and the
service-type command specifies the
available command level.
Determined by
the
service-type
command