EasyManua.ls Logo

3Com 4210 PWR - Page 515

3Com 4210 PWR
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote-Ping Configuration Example 513
Configuration procedure
Configure DHCP Server(Switch B):
Configure Remote-Ping Client (Switch A):
# Enable the Remote-Ping client.
<4210> system-view
[4210] Remote-Ping-agent enable
# Create a Remote-Ping test group, setting the administrator name to
"administrator" and test tag to "DHCP".
[4210] Remote-Ping administrator dhcp
# Configure the test type as dhcp.
[4210-Remote-Ping-administrator-dhcp] test-type dhcp
# Configure the source interface, which must be a VLAN interface. Make sure
the DHCP server resides on the network connected to this interface.
[4210-Remote-Ping-administrator-dhcp] source-interface Vlan-interface 1
# Configure to make 10 probes per test.
[4210-Remote-Ping-administrator-dhcp] count 10
# Set the probe timeout time to 5 seconds.
[4210-Remote-Ping-administrator-dhcp] timeout 5
# Start the test.
[4210-Remote-Ping-administrator-dhcp] test-enable
# Display test results
[4210-Remote-Ping-administrator-dhcp] display Remote-Ping results administra
tor
dhcp
Remote-Ping entry(admin administrator, tag dhcp) test result:
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 1018/1037/1023
Square-Sum of Round Trip Time: 10465630
Last complete test time: 2000-4-3 9:51:30.9
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
[4210-Remote-Ping-administrator-dhcp] display Remote-Ping history administra
tor
dhcp
Remote-Ping entry(admin administrator, tag dhcp) history record:
Index Response Status LastRC Time
1 1018 1 0 2000-04-03 09:51:30.9
2 1037 1 0 2000-04-03 09:51:22.9
3 1024 1 0 2000-04-03 09:51:18.9
4 1027 1 0 2000-04-03 09:51:06.8
5 1018 1 0 2000-04-03 09:51:00.8
6 1020 1 0 2000-04-03 09:50:52.8
7 1018 1 0 2000-04-03 09:50:48.8
8 1020 1 0 2000-04-03 09:50:36.8
9 1020 1 0 2000-04-03 09:50:30.8
10 1028 1 0 2000-04-03 09:50:22.8
For detailed output description, see the corresponding command manual.

Table of Contents

Related product manuals