EasyManua.ls Logo

3Com 4210 PWR - Page 525

3Com 4210 PWR
567 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote-Ping Configuration Example 523
[4210-Remote-Ping-administrator-udpprivate] display Remote-Ping results administr
ator udpprivate
Remote-Ping entry(admin administrator, tag udpprivate) test result:
Destination ip address:10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 10/12/10
Square-Sum of Round Trip Time: 1170
Last complete test time: 2000-4-2 8:29:45.5
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
[4210-Remote-Ping-administrator-udpprivate] display Remote-Ping history administr
ator udpprivate
Remote-Ping entry(admin administrator, tag udpprivate) history record:
Index Response Status LastRC Time
1 11 1 0 2000-04-02 08:29:45.5
2 12 1 0 2000-04-02 08:29:45.4
3 11 1 0 2000-04-02 08:29:45.4
4 11 1 0 2000-04-02 08:29:45.4
5 11 1 0 2000-04-02 08:29:45.4
6 11 1 0 2000-04-02 08:29:45.4
7 10 1 0 2000-04-02 08:29:45.3
8 10 1 0 2000-04-02 08:29:45.3
9 10 1 0 2000-04-02 08:29:45.3
10 11 1 0 2000-04-02 08:29:45.3
For detailed output description, see the corresponding command manual.
DNS Test Network requirements
A Switch 4210 serves as the Remote-Ping client, and a PC serves as the DNS server.
Perform a Remote-Ping DNS test between the switch and the DNS server to test
the time required from the client sends a DNS request to it receives a resolution
result from the DNS server.
Network diagram
Figure 188 Network diagram for the DNS test
Configuration procedure
Use a Windows 2003 Server as the DNS server and follow the instructions in
your Windows 2003 Server documentation to configure that server.
Configure Remote-Ping Client (Switch A)
# Enable the Remote-Ping client.
<4210> system-view
[4210] Remote-Ping-agent enable
# Create a Remote-Ping test group, setting the administrator name to
"administrator" and test tag to "dns".
[4210] Remote-Ping administrator dns
Switch
HWPing Client
IP network
10.1.1.1/8 10.2.2.2/8
DNS Server

Table of Contents

Related product manuals