70 CHAPTER 3: CONFIGURATION FILE MANAGEMENT
■ While the reset saved-configuration [ main ] command erases the
configuration file with main attribute, it only erases the main attribute of a
configuration file having both main and backup attribute.
■ While the reset saved-configuration backup command erases the
configuration file with backup attribute, it only erases the backup attribute of a
configuration file having both main and backup attribute.
c
CAUTION: This command will permanently delete the configuration file from the
device.
Specifying a
Configuration File for
the Next Startup
You can specify a configuration file to be used for the next startup and configure
the main/backup attribute for the configuration file.
Assign main attribute to the startup configuration file
■ If you save the current configuration to the main configuration file, the system
will automatically set the file as the main startup configuration file.
■ You can also use the startup saved-configuration cfgfile [ main ] command
to set the file as main startup configuration file.
Assign backup attribute to the startup configuration file
■ If you save the current configuration to the backup configuration file, the
system will automatically set the file as the backup startup configuration file.
■ You can also use the startup saved-configuration cfgfile backup command
to set the file as backup startup configuration file.
c
CAUTION: The configuration file must use ".cfg" as its extension name and the
startup configuration file must be saved at the root directory of the device.
Displaying Device
Configuration
After the above configuration, you can execute the display command in any view
to display the current and initial configurations of the device, so as to verify your
configuration.
Tabl e 39 Specify a configuration file for next startup
Operation Command Description
Specify a configuration file for
next startup
startup
saved-configuration cfgfile [
backup | main ]
Required
Available in user view
To Next Page
Loading...
