1-17
To do… Use the command… Remarks
Configure the number of
probes per test
count times
Optional
By default, one probe is made per time.
Configure a test
description
description string
Optional
By default, no description information is
configured.
Configure the automatic
test interval
frequency interval
Optional
By default, the automatic test interval is
zero seconds, indicating no automatic
test will be made.
Enable history record
history-record enable
Optional
By default, history record is not enabled.
Configure the retaining
time of history record
history keep-time
keep-time
Optional
By default, the retaining time of history
record is 120 minutes.
Configure statistics
interval and the
maximum number of
retained statistics
information
statistics { interval interval |
max-group number }
Optional
By default, statistics interval is 120
minutes and up to two pieces of statistics
information can be retained.
Configure the retaining
time of statistics
information
statistics keep-time
keep-time
Optional
By default, the retaining time of statistics
information is 120 minutes.
Configure test start time
and lifetime
test-time begin { hh:mm :ss
[ yyyy/mm/dd ] | now }
lifetime lifetime
Optional
By default, no test start time and lifetime
is configured.
Enable routing table
bypass
sendpacket passroute
Optional
By default, routing table bypass is
disabled.
Configure the TTL
ttl number
Optional
By default, TTL is 20.
The sendpacket passroute command
voids the ttl command.
Configure the probe
timeout time
timeout time
Optional
By default, a probe times out in three
seconds.
Configure the maximum
number of history
records that can be
saved
history-records number
Optional
By default, the maximum number is 50.
Configure the type of
service
tos value
Optional
By default, the service type is zero.
Start the test
test-enable
Required
Display test results
display remote-ping
results [ admin-name
operation-tag ]
Required
The display command can be executed
in any view.
To Next Page
Loading...
