3D Systems BFB-3000 User Manual

BFB-3000 Set Up and Operations Manual
Document No: D100253 27
 Remember to lock the 3 bed bolts in position by tightening the lock nut under each,
using the 8mm spanner. Whilst tightening the nut, make sure that the bolt does not
spin by holding it in position with the 3mm hex driver, from the top side of the bed.
Tighten nut to lock
bolt into position.

3D Systems BFB-3000 Specifications

General

Brand	3D Systems
Model	BFB-3000
Category	3D Printers
Language	English