3Disc FireCR Flash - Page 100

User Manual
QuantorMed Plus TM -721-EN
20
Name
Description
Auto Alignment
Alignment of laser beam position.
Erase
Erase IP.
Scan Blank
Create the first calibration image file.
Scan Low Dose
Create the second calibration image file.
Scan Mid Dose
Create the third calibration image file.
Scan High Dose
Create the fourth calibration image file.
Calibration
Create a calibration data file. After a
successful calibration the calibration window
will automatically close.
Cancel
Close the IP Calibration window. This will
abort the current calibration.
Cassette Size
Select the IP size for calibration.
Accept
Accept a calibration image file. The Accept
button is displayed to accept calibration
image files with values out of range.
Reject
Reject a calibration image file. The Reject
button is displayed to reject calibration image
files with values out of range.