User Manual
QuantorMed Plus TM -721-EN
Warnings and used symbols
To ensure the safety of patients, staff and other persons, any changes to software and hardware
delivered by 3D Imaging & Simulations Corp. may only be made with prior written permission
from 3D Imaging & Simulations Corp.
Please read the respective manuals of the connected devices, such as of the X-ray generator,
sensor, or reader, before starting to use the QuantorMed+ software.
The following symbols will be used throughout this manual:
DANGER
The functionality of the software can be destroyed in the case of
incorrect use.
If unauthorized changes have been made to delivered software
and hardware components, the warranty by 3D Imaging &
Simulations Corp. becomes void. 3D Imaging & Simulations
Corp. will not accept any responsibility or liability for the proper
functioning oh the product in such a case.
DANGER
General mandatory action manual.
The functionality of the system can be destroyed in the case of
incorrect use.
If unauthorized changes have been made to delivered system and
accessories, the warranty by 3D Imaging & Simulations Corp.
becomes void. 3D Imaging & Simulations Corp. will not accept
any responsibility or liability for the improper functioning of the
product in such a case.
WARNING
The functionality of the system can be limited in the case of
incorrect use. Hints that require special attention.
NOTE
Notes represent information that is important to know but which do
not affect the functionality of the system.
To Next Page
Loading...