Pg. 26
www.3xlogic.com | 877 3xLOGIC | helpdesk@3xlogic.com
1
Activation - White Balance can be enabled or disabled here. Auto / Indoor / Outdoor / One Push WB / Manual modes available.
One Push WB : Clicking the PUSH button saves the white balance value at the current state.
2
White Balance Mode - Select White Balance depending on the lighting conditions.
3
RB Gain - The R/B gain can be set only when the White Balance Mode is set to Manual.
4
Click Save to save the current settings.
Click 'Cancel' to return to the previous settings.
Click 'Default' to return settings to the factory defaults.
Setup - Camera Setup
Camera White Balance
3
1
2
To Next Page
Loading...
Need help?
General