3xLogic VISIX Gen III Series User Manual

Pg. 57
www.3xlogic.com | 877 3xLOGIC | helpdesk@3xlogic.com
The feature is needed when connecting the camera to the network protected by the IEEE 802.1X.
1
IEEE 802.1x - The IEEE 802.1x feature can be enabled or disabled here.
2
Protocol
- MD5: Provides one-way password-based network authentication of the client.
- PEAP : Similair TTLS in that it does not require a certificate on the client side.
- TTLS / MD5 : It does not require a certificate on the client side.
- TLS : It relies on client-side and server-side certificates to perform authentication.
3
EAPOL Version - Select the EAPOL Version.
4
ID - Type the ID to identify the client in the IEEE 802.1X authentication server.
5
Password - Type the Password to identify the client in the IEEE 802.1X authentication server.
6
Verify - Verify Password.
7
CA Certificate - Select the CA certificate required for TLS, TTLS, and PEAP authentication.
8
Certificate - Select the client certificate required for TLS authentication
9
Click Apply to save new settings.
Setup - Security Setup
IEEE 802.1X Configuration
1
2
3
4
5
6
7
8
9

3xLogic VISIX Gen III Series Specifications

General

Brand	3xLogic
Model	VISIX Gen III Series
Category	Digital Camera
Language	English