Pg. 41
www.3xlogic.com | 877 3xLOGIC | helpdesk@3xlogic.com
Image Transfer on Event can only be configured when FTP or SMTP is selected as an event rule action.
1
Pre / Post Alarm Image - Image Transfer due to event is configured by setting the Image transfer rate and Pre / Post alarm
duration.
2
Click Apply to save new settings.
Image Transfer Configuration
Setup - Trigger Action Setup
Number of Image
Pre-alarm Duration
Post-alarm Duration
Descriptions
Define Number of image transferred per second.
Define duration of image transfer before an event.
Define duration of image transfer after an event.
1
2
To Next Page
Loading...
Need help?
General
