3xLogic VISIX Gen III Series User Manual

Pg. 37
www.3xlogic.com | 877 3xLOGIC | helpdesk@3xlogic.com
SNMP is for advanced users only.
1
SNMPv1/SNMPv2 - Select the SNMPv1/SNMPv2 option and type the names of Read community and Write community.
SNMPtrapcanbeusedtocheckperiodicallyforoperationalthresholdsorfailuresthataredefinedintheMIB.
2
SNMP Trap - SNMP trap can be enabled or disabled.
SNMPv3 contains cryptographic security, a higher security level, which allows you to set the Authentication password and the
Encryption password.
3
Mode - Select either Read or Read/Write mode.
4
Activation - Disable or activate the selected mode.
5
Read/Write name - Define Read name and Write name.
6
Security Level - Select one of no auth, no priv/auth , no priv/auth, priv
7
Authentication Algorithm - Select MD5 or SHA as the authentication method.
8
Authentication Password - The Authentication Password is an encrypted password used for authentication. A minimum of 8
digits required and a maximum of up to 30 digits allowed.
9
Private-Key Algorithm - Select DES or AES as the encryption algorithm.
10
Private-Key Password - Information protection password is a private encrypted password. A minimum of 8 digits required and a
maximum of up to 30 digits allowed.
11
Click Apply to save new settings.
Setup - Network Setup
SNMP Settings
4
5
3
6
7
8
9
10
11
2
1

3xLogic VISIX Gen III Series Specifications

General

Brand	3xLogic
Model	VISIX Gen III Series
Category	Digital Camera
Language	English