Pg. 50
www.3xlogic.com | 877 3xLOGIC | helpdesk@3xlogic.com
1
Enabled - The Recording function can be enabled or disabled.
2
Storage Device - This item cannot be selected. Shows the saved SD Card.
3
File Type - Select the recording file type.
Currently only supports MP4 Type.
4
Storage - Select the storage type. SD Card(Disabled) selection is not allowed.
5
Continous - If continous mode is turned on, start continuous recording without any other setting. This settings is indepedent of
recording to a VIGIL Server.
6
Pre Duration - Define duration of pre-recording before an event.
7
Post Duration - Define duration of post-recording image transfer after an event.
8
Click Save to save the current settings.
Click 'Cancel' to return to the previous setting.
Record Configuration
Setup - Record Setup
1
2
3
4
5
6
7
8
To Next Page
Loading...