Pg. 46
www.3xlogic.com | 877 3xLOGIC | helpdesk@3xlogic.com
1
Motion Detection - Shows the Motion event status.
Event Alert Icon( ) appears if ‘Motion Detection’ is activated.
2
Area - Set the motion detected area.
You can set up to four areas.
3
Activation - Enable or Disable motion detection.
4
Sensitivity - Define the sensitivity of motion detection.
If a High value is selected, it will detect very small motions while conversely, it becomes insensitive to motion when a Low value
is selected.
5
Click Save to save the current settings.
Click 'Cancel' to return to the previous settings.
Setup - Event Setup
Motion Detection Configuration
1
3
2
4
5
To Next Page
Loading...
Need help?
General